Microsoft XBOX
1. Insert your Xbox Live
DVD into the drive. The software will automatically run and update the Xbox
dashboard to show the Xbox Live option. Once this is complete, eject the CD and
make sure you have your network cable plugged into your Xbox and in the network
port in your room. Open the Xbox Live menu (See Screen Shot).
2. Go to the Network Setup
menu (See Screen Shot).
3. In the lower right
corner of the screen you will see "MAC=" followed by a combination of 12 numbers and
letters (See Screen Shot). IMPORTANT: Write down this number as you will need it during the registration process.
4. Go to The Game Station Registration Page . You will need to use your OSU name.N to complete the resistration page. Once there you'll need to enter the MAC address from your game station.
5. Make sure your console
is set to use DHCP and that no network numbers ir IP addresses have been set, as
ResNet uses DHCP for connectivity.
6. Once approved (usually
within one business day), go back into the Xbox Live menu and then select Network
Settings. Scroll down and open the Connect menu. This will open a diagnostic
menu pictured below that verifies that a connection can be made to the Xbox Live
service (See Screen Shot).
7. You should
now have access. To test the configuration, load an Xbox Live enabled game. For
more help with Xbox Live visit the official web site at xbox.com
Sony PlayStation 2
Before
registering your PS2, you must first install the network adapter as described in the
installation guide or on the PlayStation2 Network Adapter Web site. Once you have
the network adapter installed you are ready to begin the ISP Setup
process.
1. Turn on the PS2 and
insert the Network Adaptor Startup Disc.
2. Once the menu has
appeared, press X to enter the ISP
Setup.
3. Once it has loaded,
press X to continue.
4. Your PS2 will search for
the network adapter.
5. After the network
adapter has been found, press X to
continue.
6. Press X again to continue.
7. Wait while the data is
accessed.
8. Select New and then
press X to continue.
9. Type a name for your ISP
setting. For example- UNI, but you can name it whatever you want.
10. When asked if you
currently subscribe to an ISP service, select Yes and press X to continue.
11. For connection type,
choose High speed connection (cable or DSL) and press X to continue.
12. Select Automatic
Settings and press X to
continue.
13. When asked if you ISP
requires a User ID and Password, select No and press X to continue.
14. When asked if your
Internet Service Provider requires you to input a DHCP Host Name, select No.
Unplug your network cable from the PS2, and press X to continue (Unplugging your cable will
cause the test to fail, which causes the PS2 to display your MAC
address).
15. The network connection
test will fail. Do not press X or
Triangle. Press Select to see the error message. (See Screen Shot)
16. The Network Adapter /
MAC address will be displayed. The address is a combination of 12 numbers and
letters. For example: 00 0F 1F 05 20 02. Write the MAC address down.(See Screen Shot)
17. Go to The Game Station Registration Page . You will need to use your OSU name.N to complete the resistration page. Once there you'll need to enter the MAC address from your game station.
18. To test the connection,
you will need to restart the ISP Setup program. Perform steps 1 through 14
above, but do NOT unplug the network cable this
time.
19. Once the test is
successful, press X and save the
configuration to the memory card.
20. The network
configuration will be saved to the memory card. Do not remove the network card
while this information is being saved.
21. Your PS2 should now be
configured correctly and you should now be able to start playing online. Press
X to return to the main menu.
22. To test out your
connection, you can choose Demos and press X to continue.
23. Follow the instructions
on screen to play an online game demo. For further information regarding the PS2
online service visit the official web site at PLAYSTATION.com
Nintendo GameCube
1. Remove the GameCube’s
broadband adapter from the console.
2. Printed on the underside
of the adaptor is a MAC address. Write this down.
3. Go to The Game Station Registration Page . You will need to use your OSU name.N to complete the resistration page. Once there you'll need to enter the MAC address from your game station.
4. Once approved you should
be online. To test internet connection, insert a Memory Card with 31 blocks
available, and insert a game with online capabilities, such as Phantasy Star
Online.
5. For further information
regarding GameCube visit the official web site at NINTENDO.com
